Special Accessories; Maintenance And Repairs - Stihl TS 480i Manual De Instrucciones

English
Diamond abrasive wheels
Minimum outside diameter of
front thrust washer:
Max. depth of cut:
Cutting wheels (TS 500i)
Outside diameter:
Hole diameter/spindle
diameter:
Tightening torque:
Composite resin abrasive wheels
Minimum outside diameter of
front thrust washer:
Max. depth of cut:
Diamond abrasive wheels
Minimum outside diameter of
front thrust washer:
Max. depth of cut:
44

Special Accessories

4.06 in.
(103 mm)
Contact your STIHL dealer for
3.9 in.
information regarding special
(100 mm)
accessories that may be available for
your product.
14 in.
(350 mm)
0.787 in.
(20 mm)
22 lbf ft
(30 Nm)
4.06 in.
(103 mm)
4.9 in.
(125 mm)
4.06 in.
(103 mm)
4.9 in.
(125 mm)

Maintenance and Repairs

Users of this unit should carry out only
the maintenance operations described
in this manual. Other repair work may be
performed only by authorized STIHL
service shops.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
servicing dealer using original STIHL
replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and, in some cases, by the STIHL
parts symbol K. The symbol may
appear alone on small parts.
TS 480i, TS 500i