Publicidad
Idiomas disponibles
Idiomas disponibles
CONSTRUCTION AND USE
Rotary hammer is a hand-operated power tool with insulation class II. The tool is driven by single-phase
commutator motor with rotational speed reduced with gear transmission. Rotary hammer can be used for
drilling holes in working modes with impact or rotation only. Range of use covers repair and building works,
woodworking and any work from the scope of individual, amateur activities (tinkering).
Use the power tool in accordance with the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. SDS-Plus chuck
2. Fixing sleeve
3. Direction selector switch
4. Switch lock button
5. Switch
6. Operation mode switch
7. Additional handle
8. Depth gauge rod
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
EQUIPMENT AND ACCESSORIES
1. Additional handle
2. Depth gauge rod
3. Drill chuck
4. Drill chuck adapter
5. Drills
6. Grease tube
7. Cloth
8. Carrying case
INSTALLATION OF ADDITIONAL HANDLE
Due to safety issues, always use additional handle when operating the rotary hammer. It can be fixed
in one of 12 positions on the fixing cylindrical section.
● Turn lower part of the additional handle (7) counter-clockwise to loosen.
● Slide the additional handle collar (7) over cylindrical section of the rotary hammer body.
● Choose the most comfortable position for the task at hand and slide notches in the additional handle
(7) collar over keys on the rotary hammer body.
● Turn lower part of the additional handle (7) clockwise to lock securely.
INSTALLATION OF DEPTH GAUGE ROD
Depth gauge rod (8) is used to limit the depth of drill penetration in material.
- 1 pce
- 1 pce
- 1 pce
- 1 pce
- 3 pcs
- 1 pce
- 1 pce
- 1 pce
PREPARATION FOR OPERATION
19
Publicidad
