Maytronics Dolphin M400 Instrucciones De Uso página 11

Press the Manual/Automatic select button and then choose the desired parameters according to the
following table:
Cleaning cycle
indicator
This determines
the length of the
cleaning cycle.
Delay time
indicator
This determines
when the pool
cleaner starts to
work. Delaying
allows the dirt
to settle to the
bottom of the
pool.
Cleaning action
indicator
Allowing you to
choose from the
following options.
Note:
• After 2 minutes if no button is pressed, the remote control unit will shut-down and the Pool
cleaner will continue to work in the previous settings.
• When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will
return to default settings.
10
Fast Efficient
1.5 hour cycle 2.5 hour cycle
for everyday use.
(Default setting)
Immediate start One-hour delay
(Default setting)
Standard Ultra-clean
Floor and wall Stronger suction
cleaning. and slower
(Default setting) movement.
(floor and wall).
Extra
3.5 hour cycle
Two-hour delay
Floor only Walls only
Cleans only the Cleans walls and
floor and the area waterline only.
where the floor and
walls meet.
Dolphin M400 / M500 User Instructions
|