Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
FAUCET INSTALLATION
- Remove the gasket (3), metal washer (4),
and retaining nut (5) from the faucet shank.
- If you are installing this faucet onto a 3 hole
sink use the decorative cover plate (C) to
cover the extra faucet holes. Otherwise
skip this step .
- Feed the faucet hoses through the faucet
mounting hole .
- Secure the faucet to the sink with the
gasket (3), metal washer (4), and retaining
nut (5) from underneath.
- Tighten the retaining nut (5) by hand until it
is snug. Gently tighten the two screws (6) in
the retaining nut . Do not overtighten .
Please contact cs@conglomkb .com or 1-877-333-0098 for further assistance .
For 3 hole
sinks only
Gasket (3)
Retaining Nut (5)
Gasket (3)
Retaining Nut (5)
5
Sink
Metal
Washer (4)
Fig . 1
Metal Washer (4)
Screws (6)
Fig . 2
CONGLOMKB .COM
Sink
Publicidad
