Getac F110 Serie Guia De Funcionamiento página 6

•
Charge the battery pack between 10 °C ~
30 °C (50 °F ~ 86 °F) temperature range.
A higher environment temperature will
cause the battery pack's temperature to
rise. Avoid charging the battery pack inside
a closed vehicle and in hot weather con-
dition. Also, charging will not start if the
battery pack is not within the allowed
temperature range.
•
It is recommended that you do not charge
the battery pack more than once a day.
•
It is recommended that you charge the
battery pack with the Tablet PC's power
off.
•
To maintain the battery pack's operating
efficiency when removed from the Tablet
PC, store it in a cool dark place and with
30% ~ 40% charge remaining.
•
Important guidelines when using the bat-
tery pack.
When installing or removing the battery
pack take note of the following:
– avoid installing or removing the battery
pack when the Tablet PC is in Sleep
mode. Abruptly removing the battery
pack may cause loss of data or the
Tablet PC may become unstable.
– avoid touching the battery pack termi-
nals or damage may occur, thereby
causing improper operation to it or the
Tablet PC.
The Tablet PC's input voltage and sur-
rounding temperature will directly affect
the battery pack's charge and discharge
time:
– charging time will be prolonged when
the Tablet PC is turned on.
To shorten the charging time, it is recom-
mended that you place the Tablet PC in
Sleep or hibernation mode.
– a low temperature will prolong the
charging time as well as hasten the dis-
charge time.
•
When using battery power in an extremely
low temperature environment, you may
experience shortened operating time and
incorrect battery level reading. This phe-
nomenon comes from the chemical char-
acteristics of batteries. The appropriate
operating temperature for the battery is
-10 °C ~ 50 °C (14 °F ~ 122 °F).
•
Do not leave the battery pack in storage
for more than six months without
recharging it.
4
Touchscreen Guidelines
•
Use the finger or the included stylus on the
display. Using a sharp or metallic object
other than your finger or stylus may cause
scratches and damage the display, thereby
causing errors.
•
Use a soft cloth to remove dirt on the dis-
play. The touchscreen surface has a special
protective coating that prevents dirt from
sticking to it. Not using a soft cloth may
cause damage to the special protective
coating on the touchscreen surface.
•
Turn off the Tablet PC power when clean-
ing the display. Cleaning the display with
the power on may cause improper opera-
tion.
•
Do not use excessive force on the display.
Avoid placing objects on top of the
display as this may cause the glass to
break thereby damaging the display.
•
In low and high temperatures (below 5
41 °F and above 60 C / 140 °F), the touch-
o
screen may have a slower response time or
register the touch in the wrong location.
It will go back to normal after returning
to room temperature.
•
When there is a noticeable discrepancy in
the placement of the stylus on the screen
and the indicated position of the onscreen
pointer, use the calibration utility to reca-
librate the touchscreen display.
o
C /