SKF TKRT 31 Instrucciones De Uso página 15

3. Getting started:
• Unscrew the battery compartment screw
• Insert all two AA batteries respecting the polarity
• Close the lid and tighten the screw.
• Start the instrument by pressing the red ON/OFF button
Anytime when the screen below is displayed, press any button to start
measuring speeds or distances. The device will be ready to start measuring,
with the laser or with the contact accessories. For this reason, do not direct it
at people or animals.
The device will start at the function that was set most recently, as well as the
last units used.
Please follow the steps below when setting up the device:
Direct the device at a moving object and use the desired mode: measuring
speeds or distances.
Fig. 4 – Starting screen
TKRT 31
Logo
Productname & type
(TKRT 31)
Serial number &
software version
Firmware version
13
EN