WOOD'S MDK21 Manual De Instrucciones página 9

CONTROL
PANEL
FUNCTIONS & NAME OF KEY PADS
1 On/Off: Switch the power on and off
2 Speed: Press to set up the fan
speed.
3 Drying clothes: Press the button
to set up dry clothes mode.
4 Humidity setting: Press to select
the required hymidity level.
5 Timer: Timer Set Turn Off time
6 Swing: Press to switch the swing
on or off
7 Night mode child lock:
Press once to enter the night mode. Press
continuously for 3 second to switch on or
off the child lock function blocking the
control panel.
OPERATION OF THE UNIT
1. When the device is plugged into a
socket, the machine is in standby.
Press the On/Off button to switch on
the machine and the exhaust will open.
Press again the button to switch off the
unit.
2 Press "SPEED" to select the fan
motor speed level.
3 Drying clothes. The machine
work at the highest speed to dry clothes
faster. The humidity setting is unavailable
under this mode. Note: When the unit
detects ≤40% humidity, the compressor
will stop automatically but the fan will
keep running at the highest speed.
When the unit detects ≥45%RH, humidity,
07
the compressor will restart.
4 Humidity setting : The
humidity can be set at: 50%-55%-60%-
65%-70%-Co-40%-45%. This function
is only available under the standard
dehumidification mode.
Note: once the humidity reaches the
target setting, both compressor and fan
will stop operating for 1 hour. After 1
hour, the fan will operate for 3 minutes to
circulate the air. If the humidity is higher
than selected setting, the unit will start
again. If the humidity is lower than the
selected setting, compressor and fan will
stop for another hour.
5 Timer. When the appliance is on,
press the Timer 1H/2H/4H/8H to operate a
countdown. The timer symbol will appear
on the LCD screen.
6 Swing. Press the button to switch
on and off the exhaust swing.
7 Night mode (child lock)Press the
button will enter the night mode. See
above for child lock function
WATER FULL
When the tank is full, the device will
automatically shut off and an alarm
will ring 10 times. The "water tank full"
light will also illuminate. Once the tank
is emptied, the unit will automatically
operate on the last setting. Note: the
compressor will only start operating after
5 minutes. (See compressor protection
function).
COMPRESSOR PROTECTION
FUNCTION
The unit is equipped with a compressor
Operating Instructions
protection function. The compressor will
only start 5 minutes after the unit being
turned on.
COMPRESSOR PROTECTION
FUNCTION
This device is equipped with compressor
protection function—that is, compressor
will delay 5 minutes to start.(After shut
down and open again.)
CONTINUOUS DRAINAGE.
Drainage hose 15mm. Insert the hose
to the drain outlet and place the other
end into a drainage place (sink, shower,
etc.). The water tank will not be in use.
The machine will work continuously
and will not shut down. When draining
continuously, the drain pipe should be
placed lower than the exhaust. The hose
should be straight and not be folded
or bended. Otherwise there is a risk of
overflow at the outlet.
AUTOMATIC RESTART AFTER POWER
FAILURE
Unit will automatically turn on and
operates in last setting after power
returns.
GB
9