Electrical Requirements; Recommended Cutting Capacity - skilsaw SPT62MTC Instrucciones De Funcionamiento Y Seguridad

1609B00427 eng.qxp_SPT62MTC 5/12/15 1:53 PM Page 7
• Connect this saw to a 120V, 15-amp branch circuit
with a 15-amp fuse or circuit breaker. Using the
wrong size fuse can damage the motor.
• Fuses may "blow" or circuit breakers may trip fre-
quently if motor is overloaded. Overloading can
occur if you feed the blade into the workpiece too
rapidly or start and stop too often in a short time.

Recommended cutting capacity

Use of this tool beyond rec-
ommended capacities may
lead to motor burn-out and possible electric
shock.
Applicable Blade
Dimensions
Workpiece
Cross-Section
Maximum cutting
capacity (a)
Maximum wall
thickness (b)

Electrical Requirements

• Most motor troubles may be traced to loose or in-
correct connections, overload, low voltage (such
as small size wire in the supply circuit or too overly
long supply circuit wire). Always check the con-
nections, the load and the supply circuit whenever
motor does not work well.
b b
a
4.5"
-7-
12" (305mm)
b
a
a
4"
1/4"
a
6 ⁄ "
3-1/8"