Publicidad
Idiomas disponibles
Idiomas disponibles
P SERIES 6X4 WARNING LIGHT
FIG. 1
GASKET
1.800.338.7337 / www.soundoffsignal.com
4
WIRE HARNESS
WIRE HOLE
STUDS
6X4 STUD MOUNT BACKUP LIGHT SHOWN
C L
FIG. 2
NOT TO SCALE, FOR REFERENCE ONLY
NUTS
DRILL FOR STUD MOUNT
STUD MOUNT INSTALLATION
1. Drill (2) 1/4" holes to mount light. Drill 3/4" wire hole. See
Fig. 2
2. Thread studs into the back of light.
3. Align the gasket to the mounting surface.
NOTE: Horizontal and vertical orientations indicated
on gasket for proper seal.
4. Plug wire harness into the back of the light.
5. Press light against gasket, against mont surface.
6. Secure the light to mounting surface using (2) supplied
nuts.
NOTE: Tighten until gasket is compressed. DO NOT
over tighten and strip casting threads.
DO NOT USE POWER
TOOLS TO TIGHTEN
*(x) Refers to the color of the light.
6X4 POLYCARB_WARNING 0422 REV C
Publicidad
