Soundoff Signal P Serie Instrucciones De Montaje página 9

P SERIES 6X4 WARNING LIGHT
FIG. 1
WINDOW
TAB
FIG. 3
LOCKING ARM
1.800.338.7337 / www.soundoffsignal.com
9
FIG. 2
RETAINER
FIG. 4
FULLY SEATED RETENTION CLIP
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at www.soundoffsignal.com/tech-services/returns/.
If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. ET at 1.800.338.7337 (press #4).
Questions or comments that do not require immediate attention may be emailed to techservices@soundoffsignal.com.
NOTICE:
Improper use or installation may void warranty coverage.
E N H A N C I N G S A F E T Y T H R O U G H I N N O VAT I O N
RETENTION CLIP INSTRUCTIONS*
1. Plug harness into light housing, aligning tab to window, as
shown in Fig 1.
2. Install the retainer clip over harness/light interface,
inserting retainer into window, as shown in Fig. 2.
3. Press retainer clip's locking arm to snap closed.
*In the event the harness needs to be disengaged from the
light, these instructions can be used to reattach and apply
the retention clip.
6X4 POLYCARB_WARNING 0422 REV C 6X4 POLYCARB_WARNING 0422 REV C