Pressure Relief Procedure - Titan IMPACT 640 Manual Del Propietário

unit Serial # Screen
The Unit Serial # screen shows the
sprayers serial number.
To select the Unit Serial # screen, press
the #4 key.
Timers Screen
The Timers screen shows the total time
the sprayer has been turned on as well
as the total time the sprayer has been
running (pumping).
To select the Timers screen, press the #4
key.
job Timers Screen
The Job Timers screen allows the user to
reset the "ON TIME" and "RUN TIME" to
track time on specific jobs.
To select the Job TImers screen, press
the #4 key. "JOB ON" screen will appear.
Press #3 to reset. Press #1 to continue to
"JOB RUN" screen. Press #3 to reset. Press
#1 to scroll through the remaining menu
screens.
Service Time Screen
The Service Time screen allows the user
to set a service time interval (in hours).
Below the set time, the screens shows the
current amount of hours on the sprayer
since the last activation of the service
timer. To select the Service Timer screen,
press the #4 key.
To set the service time, press the #2 (up)
and/or the #3 (down) keys to the desired
time (run hours will increase/decrease in
increments of 25 for each time you press
a key).
When the sprayer reaches the SERVICE@ time selected, the screen will
display "SERVICE DUE". To reset the timer, press the #3 key when the
pump is first turned on. This will reset the "SERVICE DUE" message
and also reset the "SERVICE TIME" to the previous setting.
Security code Screen
The Security Code screen allows the
user to set a four digit security code to
prevent unauthorized use of the sprayer. If a security code has been
set, the control system display will ask for the code at startup. If the
correct code is entered, the display will show the Main Screen and
the sprayer will operate. If the wrong code is entered, the display will
continue to ask for the correct code and the sprayer will not work. To
set or change the security code, press the #2 key.
NOTE: If the sprayer is new, no security code is set and the
main Screen will appear at startup. when setting a
security code for the first time, the "Enter Old code
Number" screen will appear, and you will need to
enter "1111".
Enter the old security code number to
access the screen that allows the code
change. If the wrong code is entered, the
display will continue to ask for the correct
code and the security code cannot be changed.
Enter the new security code. Once the
new code is entered, the display will
automatically ask that the new code be
re-entered for verification. If the same
new code is re-entered, the display will
confirm that the new code has been
© Titan Tool Inc. All rights reserved.
accepted and return to the Main Screen. If the new code is re-
entered incorrectly, the display will return to the "Enter New Code
UNIT SERIAL #
Number" screen and the process will repeat.
MENU-1 SELECT-4
If you forget or misplace your security code, you can call Titan
SER # XXXXXXXXXX
customer service for assistance.
MENU-1
TIMERS
MENU-1 SELECT-4
Prime Screen
ON TIME XXXX
RUN TIME XXXX
The Prime screen appears when the
pressure control knob is set at the "MIN"
setting.
JOB TIMERS
rapid clean Screen
MENU-1 SELECT-4
The Rapid Clean screen appears when the
pressure control knob is set at the RAPID
JOB ON X
CLEAN position and the PRIME/SPRAY valve is in the PRIME position.
MENU-1 RESET-3
JOB RUN X
MENU-1 RESET-3

Pressure relief Procedure

SERVICE TIME
MENU-1 SELECT-4
SERVICE @ XX
RUN HOURS XX
SECURITY CODE
MENU-1 CHANGE-2
ENTER OLD CODE
NUMBER XXXX
ENTER NEW CODE
NUMBER XXXX
RE-ENTER NEW
NUMBER XXXX
NEW CODE NUMBER
ACCEPTED
7
NOTE: To inactivate the anti-Theft Digital Lockout security
function, enter "1111" at the "Enter New code
Number" screen (this is the default code that leaves
the sprayer unlocked). as a result, the main Screen
will appear at sprayer startup.
NOTE: If there is no action at any menu screen for 30
seconds, the display will go back to the main Screen.
Be sure to follow the Pressure relief Procedure when
shutting down the sprayer for any purpose, including
servicing or adjusting any part of the spray system,
changing or cleaning spray tips, or preparing for
cleanup.
1. Lock the gun by pushing the gun trigger lock to the locked
position.
2. Turn off the sprayer by moving the ON/OFF switch to the OFF
position.
3. Turn the pressure control knob counterclockwise to its OFF
position in the black zone.
4. Unlock the gun by pushing the gun trigger lock to the
unlocked position.
5. Hold the metal part of the gun
firmly to the side of a metal
container to ground the gun and
avoid a build up of static electricity.
6. Trigger the gun to remove any
pressure that may still be in the
hose.
7. Lock the gun by pushing the gun
trigger lock to the locked position.
8. Move the PRIME/SPRAY valve
down to the PRIME position.
PRIME
RAPID CLEAN
English