Kobalt SGY-AIR264 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
4. Place the wall mounting bracket (D) over the
holes (flat side against the wall) and screw in all
4 screws tightly. See fig 3.
5. To hang the manual hose reel, insert the
hose reel back plate into slot on the mounting
bracket (D). Push down on the hose reel back
plate until the hole in the back plate lines up
with the quick release pin (I).
Pull out the quick release pin (I) and turn it
90 degrees to lock hose reel in place.
6. Attach the handle (G) with supplied handle
assembly screws (H) using a 5/16" (7.9mm)
wrench and Phillips screwdriver.
3
4.1
D
4.3
5
6
4.2
I
4.4
I
I
H
D
G