Publicidad
Idiomas disponibles
Idiomas disponibles
If the grid (5) and the filter (14) are damaged, provide for their replacement.
•
Make sure the grid (5) is completely dry.
•
Correctly reposition the active carbons filter (14) with the black part pointed towards the inside of the appliance
and the air inlet grid (5) in its specific seat.
Wait for the grid (5) to be completely dry before repositioning it.
Do not use the appliance without the grid (5) and/or the filter (14) or if the latter is
damaged.
4.3 - TANK CLEANING
•
If the drainage tank is dirty, wash it with cold or lukewarm water.
•
Switch the appliance off and disconnect the plug from the power socket.
•
Remove the tank (7).
•
Work as described in paragraph "3.1.a".
Do not use detergent, scouring pads, chemically treated dust cloths, gasoline, ben-
zene, thinner or other solvents, as these can scratch and damage the tank and cause
water leakage.
5 - PRESERVATION OF THE APPLIANCE
If you do not intend to use the appliance for a particularly long period of time or if operations which could produce a lot
of dust must be performed, it is advised to store the appliance as follows:
•
Switch the appliance off and disconnect the plug from the power socket.
•
Empty any water remaining in the tank.
• Wrap the supply cord and position it in the water tank (after making sure that the tank is completely dry).
•
Clean the air filter.
•
Store in a fresh and dry place away from humidity.
6 - TECHNICAL DATA
Consult the rating plate applied to the product (Fig. 2) and the technical data listed below:
Rated Capacity
Power supply
Power Consumption
Water tank capacity
Maximum Refrigerant Charge
Maximum design pressure
Minimum room size
Fuse type and rating
Noise
Net weight
Dimensions
12L / day (30°C, 80%RH)
AC 220-240V / 50Hz
180W / 0.95A
≤ 36dB(A)
2 L
R290 / 60g
12kg
High Side: 3.2MPa
Low Side: 0.7MPa
4 m
(floor area)
2
500 x 280 x 200 mm
T Type AC 250V, 3.15A
AQUARIA SILENT
EN - 22
Publicidad
