Publicidad
Idiomas disponibles
Idiomas disponibles
•
Wear heavy long pants, boots, and gloves. Avoid loose
garments or jewellery that could get caught in moving
parts of the machine or its motor.
•
Do not force tool. Use the correct tool for your
application. The correct tool will do the job better and
safer at the rate for which it is designed.
•
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance.
•
Do not use the tool if the switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous, and must be repaired.
•
Do not operate this tool when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
•
Do not operate in poor lighting. Do not use to pick up
flammable or combustible liquids, such as gasoline, or
use in areas where they may be present.
•
Do not pick up anything that is burning or smoking, such
as cigarettes, matches, or hot ashes.
•
Do not use without collection tank, filter or tubes in place
(if applicable).
•
Do not leave tool when plugged in. Unplug from outlet
when not in use and before servicing.
•
Do not use with damaged cord or plug. If tool is not
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service
center.
•
Do not pull or carry by cord, use cord as a handle, close a
door on cord, or pull cord around sharp edges or corners.
Do not run tool over cord. Keep cord away from heated
surfaces.
•
Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
•
Do not handle plug or tool with wet hands.
•
Do not use without dust bag and/or filters in place.
•
Disconnect the battery pack/power source from the tool
before making any adjustments, changing accessories, or
storing tool. Such preventive safety measures reduce the
risk of starting the tool accidentally.
•
Turn off all controls before unplugging.
•
Always turn off this tool before connecting or
disconnecting either hose.
•
This tool is provided with double insulation. Use only
identical replacement parts. See instructions for Servicing
of Double-Insulated tools.
•
To reduce the risk of fire or electric shock, use tool only
with Greenworks identical parts and supply cords. If cord
is damaged or lost, replace with identical replacement
part.
•
To reduce the risk of electric shock, this tool has a
polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
•
Follow all charging instructions and do not charge the
battery pack or tool outside of the temperature range
specifie in the instructions. Charging improperly or at
English
temperatures outside of the specifie range may damage
the battery and increase the risk of fire.
•
Do not modify or attempt to repair the tool or the battery
pack (as applicable) except as indicated in the instructions
for use and care.
•
Do not put any object into the openings when you use the
machine as a blower. Do not use with any opening
blocked. Keep free of dust, lint, hair, and anything that
may reduce air flow.
3
SERVICING OF DOUBLE-
INSULATED APPLIANCES
A double-insulated appliance is marked with one or more of
the following: The words "DOUBLE INSULATION" or
"DOUBLE INSULATED" or the double insulation symbol
(square within a square).
In a double-insulated appliance, two systems of insulation are
provided instead of grounding. No grounding means is
provided on a double-insulated appliance, nor should a means
for grounding be added to the appliance. Servicing a
doubleinsulated appliance requires extreme care and
knowledge of the system, and should be done only by
qualified service personnel. Replacement parts for a double-
insulated appliance must be identical to the parts they replace.
To reduce the risk of personal injury due to a loose electrical
connection between the appliance's plug and extension cord,
firmly and fully attach the appliance plug to the extension
cord. Periodically check the connection while operating to
ensure it is fully attached. Do not use an extension cord that
provides a loose connection. A loose connection may result in
overheating, fire, and increases the risk of a burning.
To reduce the risk of disconnection of the appliance cord
from the extension cord during operating: i) Make a knot as
shown in Figure A.
THE CORD AS SHOWN
Maintain Appliance With Care – Inspect extension cords
periodically and replace if damaged.
5
EN
Publicidad
