Optimus COMPACT Manual De Instrucciones página 5

1. INTRODUCTION
Modular audio matrix with IP connection and monitoring functions for fully managing PA and voice alarm systems. It is the main
component of the COMPACT control system.
Incorporates a UMX-C16 card inserted in slot 1 (16 input contacts and 4 output contacts) and a UMX-EA3 card in slot 2 (card with 2
audio inputs). The 8 remaining slots are available for inserting cards UMX-C16, UMX-EA3, UMX-2M3, UMX-2SA, UMX-2SB,
UMX-MC6 or UMX-LNK.
The capacity of the matrix may be expanded using COMPACT-E units (10 slots per unit) up to a maximum of 10 units. The
COMPACT-E units allow housing cards UMX-2SA, UMX-2SB, UMX-MC6, UMX-C16 or UMX-LNK/E.
Includes the connections, monitoring system and indicators required for complying with regulation EN54-16 regarding fire
evacuation.
Main characteristics:

Dual Ethernet connection for installations with redundant
network systems. The connection is constantly monitored
and switches automatically when required.

It is equipped with two power supplies (one primary and
one secondary) for redundant installations.

Front USB input for music.

Two analogue audio inputs that are configurable for
music or announcements (voice activated or PTT).

CAN bus for communicating with the COMPACT-E matrix
and peripherals.

Reception of digital audio via an IP connection (4 simulta-
neous channels).

Reception and sending of control data via an IP connec-
tion.

Monitoring of the operation of the equipment using Call
Point software and/or basic TELNET or SSH (Secure Shell)
functions.

Configuration of the IP address in Flash memory via soft-
ware.

Constant notification (IP) of the status of the equipment
via a Heart Beat signal.
COMPACT version 5.0.002
COMPACT

Incorporates an internal Micro SD memory with a capaci-
ty of 15 GB to store audio files to be used as pre-recorded
messages. These messages can be recorded / updated
remotely via IP, using the Call Point software.

Monitoring functions:
- of the speaker lines (short-circuit and line open).
- of the amplifiers.
- of the cards inserted in the matrix.
- of the primary and secondary power supplies.
- of the input contacts.
- of the pre-recorded messages.

Control of the volume of zones.

Management of the musical channels of the system.

Communication with external systems:
- VoIP: receiving of direct calls from any VoIP digital
telephone
Incorporates zone selection by sending DTMF tones.
Provides the possibility of protecting the access with a
password.
- Direct integration (XML, API/DLL).

Allows housing module ME-200B (front evacuation
panel).
R +D Department
Modular audio matrix
with IP connection
that uses standard SIP protocols.
3