Lionelo Timon Manual De Usuario página 7

bedside sleeper and the mattress of the adult bed.
Check the tightness of the attachment system before each use
12.
by pulling the bedside sleeper in a direction away from adult bed.
If there is a gap between the bedside sleeper and the adult
13.
bed DO NOT use the product.
Gaps should not be filled with pillows, blankets and other items.
14.
DANGER! Always completely raise the drop side when not
15.
attached to the adult's bed.
WARNING: To avoid hazards from the child's neck being
16.
caught on the top rail on the side that is next to the adult bed,
the top rail must not be higher than the adult bed mattress.
WARNING: To avoid risk of your child being strangled the
17.
attachment system to the adult's bed shall always be kept
away from and out of the crib.
LIST OF COMPONENTS
1.
Baby bed's frame with a base (fig. 2)
2.
Mattress (fig. 3)
3.
Wheels (4 pcs) (fig .4).
4.
Fastening belts (fig. 5)
HOW TO ASSEMBLE
1. Take the frame and a base out of the packaging carefully and place them on
a flat surface.
2. Part lower elements of the bed's frame until you can hear a distinctive click.
3. Part upper elements of the bed's frame until you can hear a distinctive click (fig. 6).
4. Fasten the material under the bed's base by wrapping a metal tube underneath
the bed with Velcro bands (fig. 7).
5. Lift the tube and use snap fasteners to attach it to the top frame of the baby's
bed (fig. 8).
6. Buckle on both sides of the opening side.
7. Press the wheels into the holes by the leg bases. They should engage
automatically. When they do, you will hear a distinctive click (fig. 9).
8. Put the mattress inside (fig. 10).
9. In order to disassemble the wheels, press the button (fig. 20) with a flat hard object.
LOCKING MECHANISM
Every wheel has a built-in locking mechanism. To lock a wheel, press the brake by
‑ 7 ‑ EN