12. Leveling the Refrigerator
CAUTION
• The front and rear leveling legs have a maximum height adjustment of 3/4" (20 mm).
• To further raise the refrigerator, put the refrigerator on top of a sheet of plywood or
runners.
• Raising the refrigerator above 3/4" (20 mm) will damage the front and rear leveling
components.
• When pairing is complete, make sure to level both appliances simultaneously. Do
not level them sequentially one after the other. Otherwise, the jack may not operate
properly.
Dacor_OneDoor_BRR9000M_IM_DA68-03621B-07_EN.indd 45
10 mm bit
1. Using your drill and the bit shown
below, engage each of the refrigerator's
adjuster shafts in turn, and level the
refrigerator. (CW , CCW )
2. Adjust the gap between the furniture
and Refrigerator top cover to 1/8 in.
(3 mm).
English 45
2020-11-16
4:25:20