Troubleshooting - Impecca DVHP-9109 Manual De Usuario

TROUBLESHOOTING

Problem
The power light does not
come on
No Picture
No Sound
Distorted Picture
Flickering or unstable
brightness
The DVD player does not
operate
No response when buttons
are pressed
The remote controller does
not work
• Plug the power cord into a wall outlet.
• Try a different wall outlet
• Select the appropriate video input format on your TV in
order to receive the player's output signals.
• Fully insert the plugs on the video cable into the corre-
sponding jacks.
• Fully insert the plugs on the audio cable into the corre-
sponding jacks.
• Turn on the stereo/amplifier system (if applicable).
• Select the correct output in the setup menu.
• Remove and clean the disc
• Some distortion may occur during the FORWARD and
REWIND operations. This is normal.
• Connect the player directly to your TV
NOTE: Disruptions can be caused by copy protection
systems on a DVD or CD
• Be sure that a disc is loaded.
• Be sure that the disc is compatible (check the disc's for-
mat and color signal coding standard).
• Check that the disc is correctly loaded.
• Clean the disc.
• Be sure that the DVD player settings are correct.
• Switch off the DVD player, unplug the power cord, and
then plug in the power cord and switch it on again.
• Point the remote controller at the sensor.
• Check that the distance from the remote control does
not exceed more than 20 feet from the sensor.
• Replace the batteries with new batteries.
13
What to Check