Connections - Impecca DVHP-9109 Manual De Usuario

CONNECTIONS

When connecting this unit to other components be sure that all devices are turned off. Audio/Video cables are
connected according to different color identification and should be fitted firmly into the appropriate jacks.
CONNECT TO A TV
1. Connect the supplied Audio/
Video cable using the red and
white cables to the Audio jacks
on the rear of the DVD player
and to the Audio Inputs on your
TV.
2. Connect the video cable
(yellow) to the Video jack on the
rear of the player to the Video
Input on your TV.
3. Set your TV to its appropriate
Video input
CONNECT TO AN AMPLIFIER
1.Connect the yellow colored
RCA cable into the VIDEO OUT
jack on the back of the DVD
player. Plug the other end of the
cable to the VIDEO INPUT jack
of your TV.
2. Plug the red and white col-
ored RCA cables into the AUDIO
OUT jacks on the back of the
DVD player. Plug the other end
of the cable to the AUDIO INPUT
jacks on your amplifier.
CONNECT TO AN AMPLIFIER WITH DIGITAL SIGNAL INPUT
1. Connect the yellow colored
RCA cable into the VIDEO OUT
jack on the back of the DVD
player. Plug the other end of the
cable to the VIDEO INPUT jack
of your TV.
2. Connect a component ca-
ble(not included) to the Y, Pb, Pr
jacks on the DVD Player and to
the Y, Pb/Cb, Pr/Cr input jacks
on your TV.
3. Plug a RCA cable into the CO-
AXIAL DIGITAL OUT jack on the
back of the DVD player. Con-
nect the other end of the cable
to the DIGITAL COAXIAL INPUT
on your amplifier.
DVD PLAYER
VIDEO IN
AUDIO IN LEFT
AUDIO IN RIGHT
VIDEO IN
AUDIO IN LEFT
AUDIO IN RIGHT
TV
VIDEO IN
DVD PLAYER
AMPLIFIER
7
TV
TV
DVD Player
AMPLIFIER
YUV VIDEO INPUT
COAXIAL