Publicidad
Idiomas disponibles
Idiomas disponibles
English
Work
Wood
Drilling
Steel
Aluminum
Small screw
Screw
tightening
Wood screw
CAUTION
● While operating the Cordless driver drill, take
care not to lock the motor.
If the motor is locked, immediately turn the
power off .
If the motor is locked for a while, the motor or
battery will be burnt.
● Do not tighten too strongly as the screw heads
will be damaged.
Use
Machine screw
Driving
Wood screw
Wood
Drilling
Metal
11. Using the hook
The hook is used to hang up the power tool to your
waist belt while working.
CAUTION
● When using the hook, hang up the power tool
fi rmly not to drop accidentally.
If the power tool is dropped, it may lead to an
accident.
● When carrying the power tool with hooked to
your waist belt, do not fi t any bit to the tip of
power tool. If the sharp bit such as drill is fi tted
to the power tool when carrying it with hooked to
your waist belt, you will be injured.
● Install securely the hook. Unless the hook is
securely installed, it may cause an injury while
using.
14
Table 5
Clutch dial position
Use for drilling purpose.
1 – 21
Use the bit and socket matching the screw diameter.
Use after drilling a pilot hole.
1 –
10. How to select tightening torque and rotational speed
● The selection examples shown in Table 6 should
Table 6
Clutch dial position
For 6 mm or smaller
1 – 21
diameter screws.
For 5.8 mm or smaller
1 –
nominal diameter screws.
For 29 mm or smaller
diameters.
(1) Removing the hook.
Suggestions
CAUTION
be considered as general standard. As diff erent
types of tightening screws and diff erent materials
to be tightened are used in actual works proper
adjustments are naturally necessary.
Rotating speed selection (Position of the shift knob)
LOW (Low speed)
Remove the screws fi xing the hook with Philips screw
driver. (Fig. 12)
Hook
Fig. 12
HIGH (High speed)
For 6 mm or smaller
diameter screws.
For 3.8 mm or smaller
nominal diameter screws.
For 12 mm or smaller
diameters.
For drilling with a metal
working drill bit.
Screw
Publicidad
