Function Of Buttons - simatherm IH 025 VOLCANO Manual De Usuario

) A The main display shows the selected heating time or heating temperature.
Display
t
°C
°F
) B The power display shows the selected power setting.
Display
•
••
•••
••••
•••••
4.2

Function of buttons

Button Function
POWER Press to adjust the power in steps of 20%. The selected
power is indicated on the power display.
Hold POWER The LEDs of the power indicator flash when set power is halved.
for more than To cancel the power reduction, press the POWER button again
5 seconds and hold for 5 s.
MODE Press to switch between TIME MODE and TEMP MODE.
UP (+) Press to increase the value shown on the main display.
DOWN (-) Press to decrease the value shown on the main display.
START/STOP Press to start or stop the heater. The LED on the START/
STOP button is lit when the heater is heating and flashes
during temperature measurement.
24
Indication
20% power
40% power
60% power
80% power
100% power
Portable Induction Heater IH 025 VOLCANO
Indication
time in minutes
temperature in degrees Celsius
temperature in degrees Fahrenheit
Display
• flashing
•• flashing
••• flashing
•••• flashing
••••• flashing
Indication
10% power
20% power
30% power
40% power
50% power
© simatec ag