Altrad TUBMIX 50 Manual Del Operador página 5

• If necessary, allow the adhesive to rest for 5-15
minutes and then mix it again for few minutes.
The machine may be moved to the position
where the adhesive is to be used.
Cement
• The mixing machine is suitable for preparing
mortar and plaster containing lime, cement,
gypsum and fine sized aggregates. It is not
suitable for mixing
containing medium-large sized gravel or
aggregates.
• For the preparation of mortar for plaster,
proceed as for adhesive for floor and wall tiles.
• As the mortar is a highly hygroscopic
preparation, in order to prevent excessive
hardening of the compound, a great deal of
attention must be paid to the addition of lime,
cement, gypsum or aggregates when nearing
the end of the mixing process.
Epoxy resins
• For mixing epoxy resin, check the viscosity and
the density of the products to be prepared, so
that the mixer motor is not overloaded.
• Pour into the tub the quantity of resin, hardener
and any powders indicated by the product
supplier.
• Mix carefully to prevent bubbles or lumps
forming in the mixture.
Paints
• Pour the paint to be mixed into the mixer drum
and add the necessary amount of water
required for the solution.
CAUTION !
! The use of chemical products or solvents
may affect the properties of the tub, made of
high density polyethyiene PET.
! Check the compatibility of the products to be
mixed with the properties of the machine
before use.
concrete or mortar
8. Maintenance
The machine's reduction unit is lubricated with
semi-fluid type synthetic grease suited for the
lubrication of enclosed gears in casings.
When changing the grease, use only products with
the characteristics listed below:
NLGI Degree:
Dropping point: °C
Thickening agent
CAUTION !
To change the grease, contact your local dealer.
9. Disposal
• In the event of the tub becoming worn or
damaged, it must be disposed of in accordance
with the methods laid down by current
legislation.
• In the event of scrapping the complete machine,
it must be disposed of in accordance with the
methods laid down by current legislation.
Electric Motor
Aluminium
Steel
Copper
Poiyamide
Machine's Framework
Steel
Poiyamide
Polyethylene
5
GB
0
115
SODIUM SOAPS
Tub
AL
AC
CU
PA
AC
PA
PET