Domo DO9194WK Manual De Instrucciones página 14

5. Place the water kettle on its base.
6. Plug in the appliance.
Press the on/off switch at the bottom of the handle. The indicator will light up and the water kettle will start the
7.
boiling process.
The water kettle will automatically switch off when the water boils. You can always stop the boiling process
8.
yourself at any moment by pushing the on/off switch upward.
Make sure that the on/off switch is clear of obstructions and that the lid is firmly closed. The water kettle will
·
not switch off automatically if the switch is hindered or if the lid is still open.
9. Remove the kettle from the base and pour out the water.
· Be careful when pouring the water since it is possible to burn yourself on the boiling water or the hot steam.
Do not open the lid when the water in the water kettle is hot.
10. The water kettle will not start boiling again until the switch is pressed down again. Let the appliance cool down for
15 to 20 seconds before reopening the water kettle to boil water.
· The water kettle can remain on its base when the appliance is not being used.
· Make sure that the water kettle does not receive any power when it is not being used, so always unplug the appliance
when not in use.
If by accident you would use the kettle without water in it, the boil dry protection will automatically switch off the
·
appliance. If this happens, let the water kettle cool down completely before filling the kettle with cold water to start
the boiling process.
CLEANING AND MAINTENANCE
· Always unplug the appliance before cleaning it.
· Never immerse the water kettle or the cord in water. Also make sure that they do not come into contact with
moisture.
· Wipe the outside of the kettle clean with a damp cloth. Never use any chemical, abrasive or scouring cleaning
products.
Also regularly clean the removable filter.
·
DESCALING
Tap water may cause scale on the inside of the water kettle. Use a liquid descaler or a non-toxic cleaning product to
remove this build-up.
An alternate solution could be the following:
Fill the water kettle with 3 cups of white vinegar and add water until the kettle is full (max. level). Let this soak
1.
overnight. However, do not boil this liquid!
2. Afterwards, pour away the solution. Stains that remain in the spout can be removed by rubbing it with a damp
cloth.
3. Fill the kettle with clean water, boil and pour away the water.
4. Repeat once more and the water kettle is again ready for use.
ENVIRONMENTAL GUIDELINES
14
DO9194WK
This symbol on the product or on its packaging indicates that this product may not be treated
as household waste. Instead it must be brought to the applicable collection point for recycling
of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.