Ohyama WOOZOO IHF-1201G-E Manual De Usuario página 37

Installation of indoor unit
Torque wrench
Indoor pipe
4. Wrap the indoor pipe and joint of con-
nection pipe with insulating pipe, and
then wrap it with tape.
Step six: install drain hose
1. Connect the drain hose to the outlet pipe of
e
indoor unit.
m
2. Bind the joint with
tape.
Note:
● Add insulating pipe in the indoor
drain hose in order to prevent
condensation.
● The plastic expansion particles are
not provided.
Step seven: connect wire of indoor unit
1. Open the panel, remove the screw
on the wiring cover and then take
down the cover.
n
Hex nut diameter Tightening torque (N.m)
Open-end
Φ6
wrench
Φ9.52
Union nut
Φ12
Φ16
Pipe
Φ19
Drain hose
Outlet pipe
Tape
34
15~20
30~40
45~55
60~65
70~75
Insulating pipe
Drain
Outlet
pipe
hose
Drain hose
Insulating pipe
Screw
Panel
Wiring cover