PRIXTON ROOMIE SMART Manual Del Usuario página 26

7.Mopping Function
Remove out water tank
Injet Water
Wet the cloth, stick it
Install Water tank
Note:
a. It is recommended that all floors are vacuumed at least three times before the first
mopping session to reduce excessive dirt buildup on the mop.
b. To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the water tank.
c. Do not use hot water ,which may cause the tank to deform.
Adjust mop humidity in the APP
as required
Note:
a. Remove cloth plate and washing the cloth, then empty the water tank frequently is
recommended if not use it to prevent odors or mildew.
b. Remove the mop cloth plate if not mopping.
c. Cleaning the mop cloth after 60 minutes of mopping is recommended to ensure water
flow and cleaning quality
Remove dust box
Open plug, fill with water
Put back dust box
Install cloth plate to
water tank
Start mopping cleaning
Ensure the robot is fully with power and turn on it,
press auto button or use the app to start cleanup.
26
Close plug tightly
Slide water tank into robot
until you hear it lock with a
click.