PRIXTON ROOMIE SMART Manual Del Usuario página 29

5.3 Dust Box and Filter Part
1.Disassembly dust box
4.Clean dust box cover
5.4 Battery
The robot is equipped with a high-performance lithium-ion rechargeable battery pack. To
maintain battery performance, keep the robot charged.
Note:
If the robot is to be left unused for an extended period, turn it off before storage and charge it
at least once every three months to avoid battery damage resulting from over-discharging.
5.5 Firware Update
Update the robot using the app.
Place the robot on the dock station and ensure that the battery level is higher than 20%
before updating.
The power indicator will flash quickly during a firmware update.
Environmental protection description
Removing the battery
* The following information applies only when disposing of the robot and should not be
followed for day-to-day operations
The chemical substances contained in the built-in lithium-ion battery of this product can
cause environmental pollution. Remove the battery before disposing of this product and
hand it to a professional battery recycling facility for centralized disposal.
1. Operate the robot until it has low battery and is unable to clean, ensuring it does not
connect to the charging dock.
2. Turn off the robot.
3. Unscrew the battery cover.
4. Remove the battery cover.
5. Pull out the battery connector and remove the battery.
2.Clean dust box
5.Rinse the dust box with
water gently tap the HEPA
29
3.Disassembly filter parts
6.Dry these parts