Desoutter QA-CHARGER Manual De Instrucciones página 8

Operation
Operation
Operating Instructions
Operating the charger
The QA-CHARGER is designed for a mains voltage/frequency range of 100-240 V~ and 50/60 Hz.
1. Connect the charger to the mains power. When the charger is connected to the mains supply, the power indica-
tor glows green.
2. Insert the Li-ion battery into the charging station. Charging starts automatically as soon as the battery is in-
serted. The charging time depends on the charge state of the Li-ion battery.
Battery Health and Charge Display
When the charger is connected to a battery, the state of health (SOH) indicator glows, while the state of charge
(SOC) indicator glows for 3 seconds before starting the charge pattern .
Battery State of Health
Battery health is shown by the colors of the battery indicator.
Battery light
Green
Yellow
Red
Battery State of Charge
The battery charge is shown by the bars in the battery indicator and shows 5 levels:
Level Battery bar indicator
1 3 white
2 2 white
3 1 white
4 1 red
5 1 red
Interconnect chargers
The charger has built in interconnection. The maximum number of chargers interconnected is limited, depending on
the output voltage of the power supply.
• Maximum 4 chargers at 100VAC (Japan)
• Maximum 5 chargers at 110-120VAC
• Maximum 10 chargers at 240VAC
This includes the master charger, that is connected to the alternating current (AC) grid.
6159990140 / v.03
Light behavior Battery health
Steady Good
Steady Decreased
Blinking Low
Light behavior
Steady
Steady
Steady
Blinking
Steady
EN
Remark
Battery is healthy and performing well
Battery will eventually need to be replaced
Battery needs to be replaced
Battery status
Full charge
Medium charge
Low charge
Nearly empty
Empty and will not work
8 / 128
Remark
Charge battery, when possible
Charge battery
Charge battery
04/2023