DAY 749539 Manual De Instrucciones página 6

Stainless steel juice steamer for induction hob
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please
also save the manual in case you need to refer to it at a later date.
MAIN COMPONENTS
Glass lid
GB
Berry section with holes 8 l
Juice section
Pan 4 l
Tap hose with clip
USE
Fill the pan with water and place it on
the hotplate.
Place the juice section on top and
check that the tap hose is fitted to the
pipe and that the clip is fitted.
Place the berry section on top of the
juice section and fill it with clean ber-
ries or fruit. Place the lid on the pan.
Adjust the temperature of the hotplate
so that the water heats gently through-
out the process. Make sure there is
always water in the pan.
SERVICE CENTRE
Note: Please provide the product model num-
ber in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
Manufactured in China
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
Once the water has been boiling for
around half an hour, approximately
one litre of juice can be drained into a
jug. This can then be poured back into
the berry section. Distribute the sugar
evenly over the berries. The warm juice
softens the berries and dissolves the
sugar.
Drain off the juice and pour it into
clean, sterilised bottles.
Always clean the juice steamer after
use. Hard water may cause a build-up
of limescale in the pan. For that reason,
always wipe the pan with half a lemon
or boil a vinegar solution in the pan (10
ml ordinary vinegar per 1 litre water).
Wipe the pan down.
For:
• Complaints
• Replacements parts
• Returns
• Guarantee issues
• www.schou.com
All rights reserved. The content of this manual may
not be reproduced, either in full or in part, in any way
by electronic or mechanical means, e.g. photocopying
or publication, translated or saved in an information
storage and retrieval system without written permission
from Schou Company A/S.
6 6