Specifications - AllTrade TRADES PRO 830271 Manual De Instrucciones

Problem
Leaking Oil from Pump
Leaking water from
bottom of unit
Spray wand leaks
MAXIMUM PRESSURE
MAX WATER FLOW
VOLTAGE
CURRENT
ELECTRICAL CORD
DETERGENT BOTTLE
PRESSURE HOSE
REQUIRED INLET WATER PRESSURE
TROUBLESHOOTING GUIDE
Probable Cause
1. A small amount of leakage
is normal.
1. Water Inlet
connection is loose or
defective.
1. Spray wand is not
properly attached.

SPECIFICATIONS

1800 PSI (124 BAR)
1.6 GPM (6.0 LPM)
120V / 60HZ
13A
35 FT. (10.6 M)
33.8 FL OZ (1.0 LTR)
25 FT. (7.6 M)
40-60 PSI (2.7 BARS – 4.1 BARS)
25
Solution
1. If leakage persists, Call
Customer Service:
1-800-423-3598.
1. Tighten inlet connection, if
leaking persists, the con-
nection is defective. Call
Customer Service:
1-800-423-3598.
1. See instructions.