Mitsubishi Heavy Industries SRK63ZM-S Manual Del Propietário página 22

HIGH POWER/ECONOMY operation
Concerning HIGH POWER operation
Pressing the HI/ECO button intensifies the operating power and initiates powerful cooling or heating operation for 15 minutes continu-
ously. The remote control
NOTE
• During the HIGH POWER operation, the room temperature
is not controlled. When it causes an excessive cooling or
heating,press the HI/ECO button again to cancel the HIGH
POWER operation.
• HIGH POWER operation is not available during the DRY
and ON-TIMER + OFF-TIMER operations.
• When HIGH POWER operation is set after setting ON-
TIMER operation, HIGH POWER operation will start from
the set time.
• Not operable while the air conditioner is OFF.
• After HIGH POWER operation, the sound of refrigerant
flowing may be heard.
Concerning ECONOMY operation
Pressing the HI/ECO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or heating.
The unit operates 1.5°C higher than the setting temperature during cooling or 2.5°C lower than that during heating. The remote
control displays and the FAN SPEED display disappears.
NOTE
• It will go into ECONOMY operation at the next time the air-
conditioner runs in the following case.
1 When the air-conditioner is stopped by ON/OFF button
during ECONOMY operation.
2 When the air-conditioner is stopped in SLEEP or OFF
TIMER operation during ECONOMY operation.
3 When the operation is retrieved from CLEAN or AL-
LERGEN CLEAR operation.
If the air-conditioner is not operating, point the remote control toward the air conditioner, and
1
2
displays and the FAN SPEED display disappears.
Press the ON/OFF button.
Press the HI/ECO button.
• When the operating mode is AUTO, COOL or HEAT
Every time the HI/ECO button is pressed, the display is switched in the
order of:
(HIGH POWER) (ECONOMY)
• When the operating mode is DRY or ON-TIMER + OFF-TIMER
Every time the HI/ECO button is pressed, the display is switched in the
order of:
(ECONOMY)
• When the following operations are set, HIGH POWER
operation will be canceled.
1 When the HI/ECO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER
operation has started.
4 When the 3D AUTO button is pressed.
5 When the SILENT button is pressed.
6 When the NIGHT SETBACK button is pressed.
• When the following operations are set, ECONOMY operation
will be canceled.
1 When the HI/ECO button is pressed again.
2 When the operation mode is changed DRY to FAN.
3 When the NIGHT SETBACK button is pressed.
• Not operable while the air conditioner is OFF.
– 20 –
No display
(Normal operation)
No display
(Normal operation)