Console (Fig. F); Jog Wheel And Buttons - Tunturi T80 Treadmill Manual Del Usuario

Circuit breaker (Fig. E-2B)
The equipment is equipped with a circuit breaker that
interrupts the circuit when the electricity load is above
the maximum capacity. When this occurs, the circuit
breaker must be pressed.
WARNING
• Before pressing the circuit breaker, remove the
mains plug from the equipment.
If the equipment shuts down, proceed as follows to
restart the equipment:
- Remove the mains plug from the equipment.
- Press the circuit breaker to restart the equipment.
- Insert the mains plug into the equipment.
NOTE
• Some circuit breakers used in homes are not
rated for high inrush currents that can occur
when a treadmill is first turned on or even during
normal use. If your treadmill is tripping the circuit
breaker (even though it is the proper current
rating and the treadmill is the only appliance
on the circuit) but the circuit breaker on the
treadmill itself does not trip, you will need to
replace the breaker with a high inrush type. This
is not a warranty defect. This is a condition we as
a manufacture have no ability to control.
Unfolding and folding the
equipment (Fig. F1-F2)
The equipment can be unfolded for use (Fig. F1) and
folded for transport and storage (Fig. F2).
Refer to the illustrations for the correct way of unfolding
and folding the equipment.
CAUTION
• Before folding the equipment, make sure that
the incline is 0%. If the incline is not 0%, folding
will damage the mechanism.

Console (Fig. F)

CAUTION
• Keep the console away from direct sunlight.
• Dry the surface of the console when it is covered
with drops of sweat.
• Do not lean on the console.
NOTE
• The console switches to standby mode when the
equipment is not used for 4 minutes.

Jog wheel and Buttons

Back/ Stop
- Move back to previous window
- Stop the active training
User (Settings):
- Press this button to enter User Setting mode screen
- This button is of no use during workout
Speed + (Hare)
- Increases the speed (0,8~22 Kph).
- Pressing once increases the speed 0,1 kph.
- Pressing and holding for two seconds will increase
the speed faster.
- Scroll programs and change values in programming
mode.
Speed - (Turtle)
- Decreases the speed (0,8~22 Kph).
- Pressing once decreases the speed 0,1 kph.
- Pressing and holding for two seconds will decrease
the speed faster.
- Scroll programs and change values in programming
mode.
Incline +
- Increases the incline (0%~15% ±1%).
- Scroll programs and change values in programming
mode.
Incline -:
- Decreases the incline (0%~15% ± 1%).
- Scroll programs and change values in programming
mode.
Jog wheel: (Fig. E-03)
Turn functions:
- Choose workout mode in main menu
- User/setting mode option selection
- Choose working item on the setting screen
- Increase or decrease the setting value
- Adjusting target value (high/low) during workout
Horizontal
Turning clockwise to choose option rightward;
counterclockwise for leftward.
Vertical
Turning clockwise to shift up; counterclockwise to shift
down.
Press functions:
- Sport mode confirmation
- Option confirmation under User/Setting mode
- Confirmation of working item on setting screen
- Setting value confirmation
- Screen switching between bpm / incline Profile
- Screen switching between Video / Profile during
T-Road
2 9
English