Technical Specifications - Fracarro SIG7100 Instrucciones De Uso

Input connectors/demixing
Impedance
Output connectors
Common Interface
Input frequency
Input level
Input return loss
Tuning step
AFC
Self-demixing input loss
Max. number of modules to demix at the input
LNB remote power
DiSEqC
Symbol rate
FEC
Output connectors
Standard Video
Video Format
Video Level
Audio format
Audio level
Connector
Type
Programmation
Power supply
Typical consumption
Operating temperature
Dimensions
Technical data is nominal values and refer to an operating temperature of 5° C.

8. TECHNICAL SPECIFICATIONS

CONNECTORS
 F connectors
75 Ω
3 connectors RCA (Video/Audio stereo)
PCMCIA (EN501, TS101699)
INPUT SIGNAL
950 ÷ 150 MHz
48 ÷ 85 dBµV
10 dB
1 MHz
± 5 MHz
 dB
Depends on the frequency and level of the input sig-
nal
14/18V, 0/kHz, 00mA@14V – 100mA@18V
1.0 (4 satellite)
 – 40 Msy/s (DVB-S)
 – 30 Msy/s (DVB-S)
Auto
OUTPUT SIGNAL
Audio/Video output baseband
RCA Female
PAL, PAL-N, SECAM-L, NTSC-M, PAL-M
Letter Box, Pan and Scan, Combined, Adapted
16/9
1 Vpp typical at 75 Ohm
Mono, Mono lang 1, Mono lang , Stereo
550 mVrms max
Transport stream
48 poli su back panel
Parallel, 8 data bit
GENERAL PARAMETERS
TPE through interconnection module
0 - 40 V ~ 50 - 60 Hz
11 W (Measured with 00mA@14V provided to LNB
and with CAM)
-10 ÷ +45 °C
7e x 3u x 4 mm
7