Publicidad
Idiomas disponibles
Idiomas disponibles
‑ Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
How to use
Shaving beard
1
Slide the switch lock button
downwards�
2
Press the power switch and shave�
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
• To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
3
Press the power switch when finished.
While using
The remaining battery
capacity are shown and
then turn off after
5 seconds.
• Approximate amount of
battery capacity is
displayed as 20 ‑ 100.
When the battery capacity is low
"20" blinks when operating the shaver.
• You can shave 2 to 3 times after "20" blinks.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient
temperature lower than approximately 5 °C (41 °F).
• To prevent erroneous operation, place your fingers on
the thumb rest while using the shaver.
• The sonic vibration cleaning mode is activated when
the power switch is pressed for more than 2 seconds
while the shaver is not operating. (See page 14.)
You cannot shave in this mode.
After use
The remaining battery
capacity blink and then
turn off after 5 seconds.
13
Publicidad
