Publicidad
Idiomas disponibles
Idiomas disponibles
2. Set the temperature control dial (B) to the required ironing temperature by turning
it to the appropriate temperature indication.
3. Insert the mains plug (J) into an earthed wall socket and set the on/off switch to
"on".
• The steam station and the iron will now start heating up, the iron working lamp /
steam ready indicator (C) will go on.
• The iron takes approx. 1 minute to heat up to ●● and the steam station takes approx.
2 minutes to heat up.
• As soon as the steam station has reached its maxinum pressure level and is ready for
steam ironing, the iron working lamp/steam ready indicator (C) will turn off.
Tips
• If the article consists of various kind of fibres, always select the temperature required
by the most delicate fibre i.e. the lowest temperature. If, for example, the fabric con-
sists of 60% polyester and 40% cotton, it should be ironed at the temperature indicat-
ed for polyester (●●).
• If you do not know what kind of fabric(s) the article is made of, determine the right
ironing temperature by ironing a part that will not be visible when you wear or use
the article.
• Silk, woolen and synthetic materials: iron the reverse side of the fabric to prevent shiny
patches.
• Fabrics that tend to acquire shiny patches should be ironed in one direction only (along
with the nap ) while applying very little pressure.
• Start ironing the articles that require the lowest ironing temperature, i.e. those made
of synthetic materials.
• To make the iron cool down faster, simply apply steam or iron a piece of cloth.
STEAM IRONING
The interconnection cord (D) may become hot during a long ironing session.
• Buzz one time after turn on the Power on/off switch .
• The system may occasionally produce a pumping sound during steam ironing. This is
normal and tells you that water is being pumped into the steam tank.
ො Make sure there is enough water in the water tank.
ො Press the steam button (A) to start steam ironing. Turn-on the steam knob (B) for
steam adjust.
• Steam ironing is only possible at higher ironing temperatures (higher than ●●).
• During steam ironing, the steam pilot light goes on from time to time to indicate tem-
Publicidad
