Butler KENDO.30LIGHT Manual De Instrucciones página 23

7105-M002-0_B
GB
Page 23 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
SUMMARY
1.0 GENERAL INTRODUCTION _______ 26
2.0 INTENDED USE ___________________ 26
2.1 Training of personnel ________________ 26
3.0 SAFETY DEVICES ________________ 26
3.1 Residual risks ________________________ 26
4.0 GENERAL SAFETY RULES ________ 27
5.0 PACKING AND MOBILIZATION
FOR TRANSPORT _________________ 27
6.0 MOBILIZATION ___________________ 28
7.0 UNPACKING ______________________ 28
8.0 INSTALLATION SPACE ____________ 28
9.0 ASSEMBLY AND PREPARATION
FOR USE __________________________ 29
9.1 Accessories contained in the packing _ 29
9.2 Assembly procedure __________________ 29
9.3 Electrical connection ________________ 30
9.4 Working area modification ___________ 30
10.0 ANCHORING SYSTEM ____________ 31
11.0 CONTROLS _______________________ 32
11.1 Control device (see Fig. 14) ___________ 32
11.2 Pedalboard (see Fig. 15) ______________ 33
INSTRUCTION, USE AND
MAINTENANCE MANUAL
12.0 USING THE MACHINE ____________ 33
12.1 Preliminary operations - Preparing
12.2 Wheel locking ________________________ 33
12.2.1 Reverse wheel pan protection ____ 35
12.3 Bead breaking through vertical rolls _ 35
12.4 Demounting the tyre _________________ 36
12.5 Tyre mounting _______________________ 38
12.6 Special use of the bead-breaker _______ 39
13.0 ROUTINE MAINTENANCE _________ 39
14.0 FAULT - FINDING _________________ 41
15.0 TECHNICAL DATA ________________ 41
15.1 Weight _______________________________ 41
15.2 Dimensions __________________________ 42
16.0 STORING _________________________ 43
17.0 SCRAPPING _______________________ 43
17.1 Instructions for the dorrect
18.0 REGISTRATION PLATE DATA _____ 43
19.0 LIST OF COMPONENTS ___________ 43
the wheel ____________________________ 33
management of waste from electric and
electronic equipment (in italian RAEE)
according to legislative decree 151/05 _ 43