Butler KENDO.30LIGHT Manual De Instrucciones página 34

To lock a rim proceed as follows:
1. Extract the central locking shaft and its cone (Fig. 17
pos. 1) through the proper handle (Fig. 17 pos. 2)
and, if necessary, turn it to make easy the extraction.
Fig. 17
2. Dowel the wheel (Fig. 18 pos. 1) on the locking plat-
form and check that the dragging pin (Fig. 18 pos. 2)
enter in a hole placed on the rim hub.
Fig. 18
3. If the wheel hub is higher then the dragger (Fig. 19
pos. 2), use the extension (Fig. 19 pos. 1) supplied
on issue.
INSTRUCTION, USE AND
MAINTENANCE MANUAL
4. Insert the shaft and the relative cone (Fig. 20 pos. 1)
5. Turn of 90° (Fig. 21 pos. 1) and lift the shaft (Fig. 21
Page 34 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
Fig. 19
on the rim (Fig. 20 pos. 2).
pos. 2) to hook it inner the hole.
7105-M002-0_B
GB
Fig. 20
Fig. 21