Special Use Of The Bead-Breaker; Routine Maintenance - Butler KENDO.30LIGHT Manual De Instrucciones

7105-M002-0_B
GB
Page 39 of 106
KENDO.30LIGHT-KENDO.30LIGHTFI
6. Lower the upper bead breaker roll so that the tyre
bead is kept at the same height of the rim channel
(see Fig. 42)
Fig. 42
7. Rotate in clockwise sense of rotation till the com-
plete tyre mounting (see Fig. 43).
NOTE: for the mounting of very difficult wheel, use the
extension of the bead depressor (Fig. 43 pos. 1).
Fig. 43
1
8. When the operations have been completed move all
the tools in rest position.

12.6 Special use of the bead-breaker

In addition to its use during mounting and un-mount-
ing, the bead-breaker can also be used for matching the
tyre to the rim. To conduct this operation follow the fol-
lowing instructions:
• Grip the tyre between the bead-breaker rollers.
• Turn the motor anti-clockwise until the reference point
on the tyre coincides with the reference point on the
rim (usually the valve) (See Fig. 44).
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Fig. 44

13.0 ROUTINE MAINTENANCE

To guarantee the efficiency and correct functioning of the
machine, it is essential to carry out daily or weekly clean-
ing and weekly routine maintenance, as described be-
low.
Cleaning and routine maintenance must be conducted
by authorized personnel and according to the instruc-
tions given below.
• Disconnect the mains power supply before starting
any cleaning or routine maintenance operations.
• Remove deposits of tyre powder and other waste ma-
terials with a vacuum cleaner.
DO NOT BLOW IT WITH COMPRESSED AIR.
• Do not use solvents to clean the pressure regulator.
• The conditioning unit is equipped with an automatic
vacuum-operated drain therefore it requires no
manual intervention by the operator (see Fig. 45).
PRESSURE
REGULATOR
OILER
AUTOMATIC
DEPRESSURE RELEASE
Fig. 45
AIR
SUPPLY