VBM REPLICA HX Manual De Instrucciones página 77

Coffee overflows from the edges
of the filter holder.
The coffee is too cold.
Coffee is not dispensed or
dispensed too slowly.
The machine does not dispense
steam.
The machine does not dispense
hot water.
Cause
There is dirt in the filter holder seat that
prevents the coffee from coming out of the
spout.
Unit gasket worn out.
Spray heads clogged.
Machine not ready.
Unit/s off.
Insufficient water supply.
Dispensing hole of the filter holder clogged.
Too fine grinding.
Dispensing nozzle clogged.
Dispensing ducts clogged.
Faulty steam tap.
Faulty dispensing solenoid valve.
Dispensing ducts obstructed.
Solution
Clean.
Replace.
Clean or replace.
Wait until it reaches the operating temperature.
Turn on the units.
Check the supply line.
Thoroughly clean the filter holder with specific
detergent and using a toothpick.
Adjust the grinder/doser.
Clean.
Call a technician to descale the machine.
Call Technical Service.
Call Technical Service.
Call a technician to descale the machine.
37