Laica HYDROSMART GENOVA Instrucciones Y Garantía página 12

EN GENOVA tap filter
6) To install the connector with the M adapter, proceed as follows:
Remove the fastening ring from the connector and take the L adapter with Ø21 mm diameter, then assemble the
-
three pieces as described in figure 6A, 6B and 6C.
6A
N
- Loosen the fastening band with a flat head screwdriver and remove the smaller seal inside the adapter M (fig.
7A, 7B).
7A
Choose the best seal: only the one with the largest diameter (fig. 8A) or both with one inserted inside the other,
-
pressing firmly and taking extra care over the direction in which they are inserted (fig. 8B).
8A
- Install the adapter M on the tap and tighten the fastening band using a flat
head screwdriver to secure it firmly to the tap (fig. 9A and B).
9A
7) Remove the HYDROSMART™ filter from its packaging and rinse it under running water. Now hook the filter to
the connector as shown in figure 11A, 11B, 11C.
11A
8B
9B
11B
6B
N
7B
-
11C
12
6C
Screw the connector onto
the ring (fig. 10).
10