Common Operations - Fonexion ideus ITDECTBB10 Manual De Usuario

USER GUIDE
9

COMMON OPERATIONS

Volume control and Hands-free feature
Press or to start a calling with the hands-free activated, or just to answer an
incoming call with hands-free mode. During a hands-free call, you'll be able to adjust
the volume of the speaker at your convenience by pressing the direction keys.
Activate private mode
During a call, press OK key once to mute the mouthpiece and MUTE will show on LCD.
Press key again to get back to the call and the MUTE will disappear.
Caller ID
The Caller ID funtion may depend on your network provider, and extra charges might
be applied.
This function is turned on automatically and allows you to check the phone number of
the incoming caller.
Re-dial
You can re-dial again automatically to the latest dialed number by pressing the
keys to open the line -depending if you want to make a normal call or a hands-free
call- and then pressing RD/P to re-dial to the last outgoing number.
Pre-dial
The pre-dial function allows you to edit the input number whilst your introducing the
number, before making the call. Press R/CLR to remove characters and
make the call.
Intercom
In idle mode, press INT key once:
The user will be prompted to select the number of the internal handset with which
you wish to connect.
The destination handset will ring.
Once the call is connected, the display will be shown on both handsets.
To end intercom mode, either handset can hang up the call by press
Call transfer
During a call, you can transfer the call to another handset.
During a phone call, press INT key once, you will be prompted to select the
number of the internal handset with which they wish to connect.
The destination handset will ring. With the melody defined for an internal call.
Press the or
The two internal handsets will be connected. To complete the transfer of the call,
the initiating handset should be placed on the cradle and the external call will
now be connected to the second handset.
key of the other handset to accept the call.
ITDECTBB10
or
or to
key.
27
EN