OK. OSP 1130 Manual De Instrucciones página 13

COMPONENTS
The product may be available in different colors.
OSP 1130
A. Hotplate
B. Power cord with plug
C. Anti-slip feet
D. Thermostat knob
E. Indicator light
BEFORE FIRST TIME USE
During manufacturing, parts of the product (hotplate) are coated with a protective film. To remove
production residue, run the product on MAX setting for approx. 3 minutes without pot/saucepan. Make
sure there is sufficient ventilation as a slight odor and some smoke may occur. This is normal and will
vanish shortly.
TIPS FOR CHOOSING POTS/SAUCEPANS
Only use pots/saucepans with flat bottom to prevent damage to the hotplate.
1
Use pots/saucepans that have close to the same diameter as the hotplate to minimize the loss of
2
heat and prevent the hotplate from being damaged as a result of uneven heat distribution.
OPERATION
Warning! Glass top, use with care!
Do not drop heavy or hard objects on the glass cooktop , or they may crack it.
3 Place the product on an even, stable and heat resistant surface.
Connect the power plug to a suitable power outlet.
4
Place a pot/saucepan on the hotplate.
5
Note: Ensure that the pot/saucepan is clean and dry on the outside. Do not plug in the product if
there is no pot/saucepan placed on the hotplate.
Turn the thermostat knob to the desired setting.
6
Setting Function
MIN - 1 Keeping warm
2
Simmering
3 - 4
Regular cooking
MAX
Parboiling and quick frying
The power indicator will shine while the hotplate is heating up. Once the pre-set level has been
7
reached, it will go out.
Note: The indicator light will come on and off during use to keep the set heat level.
Turn the thermostat to MIN after use and unplug the product to it turn off.
8
Warning: Always unplug the product to ensure it is completely turned off.
IM_OSP1130_ODP2430_170629_V06_HR.indb 13
13
ODP 2430
A. Hotplate
B. Power cord with plug
C. Anti-slip feet
D. Thermostat knob
E. Indicator light
EN
30/6/17 9:55 am