Descargar Imprimir esta página

VANTRUE Element 2 Manual De Usuario página 31

Ocultar thumbs Ver también para Element 2:

Publicidad

Idiomas disponibles

Idiomas disponibles

mode) can only be enabled one at a time. When one is enabled, the
other will be automatically disabled.
All videos recorded in parking mode(Collison Detection, Motion Detec-
4.
tion, Low Bitrate Recording, Low Framerate mode) will be saved in the
normal video folder. In order to prevent the video in parking mode from
being overwritten in a loop, please check and save the required files in
time to prevent loss.
Collision Detection
When collision detection is enabled, the
recording interface, indicating that the camera is currently using collision
detection mode. Collision detection sensitivity can be adjusted from 1 to
5 levels. You can adjust according to your habits, as well as the surround-
ings of the car.
1440P+1440P 30FPS
When the Collision Detection is turned on, and no movement is detected
after 5 minutes of recording (5-minute entry mechanism for short), then
Collision Detection is activated with a
and the camera automatically turn off. When the dash cam is turned off, it
will start to record for 1 minute after being shaken, then turn off the dash
cam again.
00:00:37
14:39:07
- 27 -
icon will be displayed on the
35
11-18-2022
MP/H
icon in the middle of the screen,
N E N
N E N E
E

Publicidad

loading

Este manual también es adecuado para:

E2