Hilti C 4/36-350 Manual De Instrucciones página 10

The C4-36-DC charger can be connected to a 12 volt or 24 volt DC electric
supply socket in a motor vehicle.
A list of the batteries approved for use with this product can be found at the
end of this document.
3.3 Information displayed
3.3.1 Information displayed by the charger and battery
Display
LED lights constantly.
Blinking.
LED doesn't light.
3.3.2 Li-ion battery state of charge display
Status
4 LEDs light.
3 LEDs light, 1 LED blinks.
2 LEDs light, 1 LED blinks.
1 LED lights, 1 LED blinks.
1 LED blinks.
3.4 Items supplied
Charger, operating instructions.
4 Technical data
Weight
Output voltage
Output power
6 English
Printed: 25.07.2017 | Doc-Nr: PUB / 5069441 / 000 / 10
On the battery
Indication of state of
charge.
Charging is in
progress.
Green LED on the
charger lights con-
stantly , no LEDs light
on the battery: Battery
malfunction.
Meaning
• State of charge: 100 %
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• State of charge: < 25 %
C 4/36­90
1.3 lb
(0.6 kg)
7.2 V ... 36 V
120 V 90 W
12 V •/•
24 V •/•
2
On the charger
The charger is con-
nected and ready for
operation.
The battery is too hot
or too cold.
Charger malfunction.
2
C 4/36­350 C 4/36­DC
2.4 lb 1.3 lb
(1.1 kg) (0.6 kg)
7.2 V ... 36 V 7.2 V ... 36 V
350 W •/•
•/• 60 W
•/• 60 W