Nordcap CSD 003 E Manual De Instrucciones página 25

DESCRIPTION OF CONTROLS VERS. E
In the items with separate drawers, the white arrows on the label will indicate which drawer is controlled by the board.
Models with 3 separate drawers: the central drawer does not have any indication.
RECOMMENDATIONS DURING OPERATION
•
The appliance should always be pre-heated before introducing the product
•
Open the door during operation as little as possible
•
Open or close the round vents, placed on the front side of the unit, to adjust moisture inside the cavity. Closed
vent: moisture will remain inside the cavity. Open vent: moisture will go out. Adjust the vent according to the kind
of food inside the cavity.
OPERATING METHODS
• Switch on the appliance by pressing key A.
Preheating
• Three dotted line will appear.
• To pre-heat, press key F and the display will show time infinite (INF).
• Press key I and select the temperature value required using keys D and E.
• Then press key B, START.
• The display will show always actual temperature chamber.
Keeping warm To keep warm only, one proceed in two ways:
 • Switch on the appliance by pressing key A.
• Three dotted line will appear.
• Press key H (HOLD) and the display will show pre-set temperature.
• Select the temperature value required using keys D and E, then press key B, START for the start-up.
• The display will show always actual temperature chamber.
 • Switch on the appliance by pressing key A.
• Three dotted line will appear.
• Press key F and the display will show time infinite (INF).
• Press key I and the display will show pre-set temperature.
• Select the temperature value required using keys D and E, then press key B, START for the start-up.
• The display will show always actual temperature chamber.
DESCRIPTION OF CONTROLS
A. ON/OFF switch
B. START/STOP key
C. Display
D. Temperature increase key
E. Temperature decrease key
F. Time selection key
G. Core probe selection key
H. Keeping warm key
I. Temperature selection key
Upper drawer
Lower drawer
24
GB
Ed. 0722