Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the seat
Attach the Trailer
18
1. Fit the seat to the vehicle body.
2. Insert two #12 screws and tighten.
1. As shown: clamp the rear
support shaft to the rear
support using M4 * 25 screws
and M4 nuts.
2. As shown in figure:
Insert the rear support wheel
axle into the rear support.
Attach the Trailer Wheels
1. Slide trailer bushing (longer plastic ring) on the trailer axle.
2. Slide a #10 washer onto the trailer axle.
3. Slide a normal wheel (out side first) on the trailer axle.
4. Slide a #10 washer onto the trailer axle.
5. Tighten a locknut to the end of trailer axle with a spanner.
Hint: An extra spanner has been provided to lock the nut on the other side of the
trailer axle while tightening the lock nut on the other side.
6. Insert the normal wheel hubcaps to the wheels.
Attach the trailer to the vehicle body
7. Fit the trailer assembly to the trailer
linkage on the vehicle body.
8. The alignment connection rod with
connecting pin.
9. With holder pin connection to prevent fall.
19
Publicidad
