Home Decorators Collection BRAISE 56045 Guía De Uso Y Mantenimiento página 6

Installation
MOUNTING OPTIONS
WARNING: To reduce the risk of fire, electric shock or
personal injury, mount to outlet box marked "Acceptable
for fan support of 35 lb (15.9 kg) or less", and use screws
provided with the outlet box. An outlet box commonly
used for the support of lighting fixtures may not be
acceptable for fan support and may need to be replaced.
If in doubt, consult a qualified electrician.
If your ceiling fan does not have an existing UL Listed mounting
box, then install one using the following instructions:
□
Disconnect the power by removing the fuses or turning off
the circuit breakers.
□
Secure the outlet box directly to the building structure. Use
the appropriate fasteners and materials. The outlet box and
support structure must be securely mounted and capable of
reliably supporting a minimum of 35 lb (15.9 kg). Use only UL
Listed outlet boxes marked "Acceptable for fan support of
35 lb (15.9 kg) or less" Do not use a plastic outlet box.
The illustrations below show three different ways to mount the
outlet box.
Recessed
Outlet
Box
Outlet Box
Outlet Box
Provide Strong
Support
Ceiling
Mounting
Plate
NOTE: You may need a longer ball/downrod assembly
to maintain proper blade clearance when installing on a
steep, sloped ceiling. The maximum angle allowable is
20° away from horizontal.
If the canopy touches the ball/downrod assembly, then remove the
decorative canopy bottom cover, and turn the canopy 180° before
attaching the canopy to the mounting plate.
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown above
(available at any Home Depot store).
6
Hanger Bar
Outlet Box