Publicidad
Idiomas disponibles
Idiomas disponibles
-Please make sure to check that the steering system is correctly adjusted and that ali
connection components are firmly secured and not broken before riding, refer to handle
assembly and safety instruction.
-Please read operation guide and warnings of correct techniques for use and braking
-Always wea r shoes.
-We highly recommend to always wear helmet/pads for your own protection.
-Self-locking nuts and other self- locking fixings may lose their effectiveness.
-AII parts and materials of electric scooter cannot be changed, modifications of the scooter
are not allowed. lf done, then warranty is void.
- Storage and cleaning
lf your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water-gun or running water, as this could damage vital parts. lt is also possible
to use a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure
to cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the interna! structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for storing in wet areas. Nor is it good to expose to
high temperatures caused by direct sun for a long time.
8. Operational control
For better operation, please read the instructions carefully.
8.1 Button
There are three buttons in the display,
down button.
8.2 Control and display
Battery level
Gear
Electric Brake
Button
Single mileage
Accelerator Button
Power button,
▲
Speed up button and
Speed up Button
Power Button
Speed down Button
Speed
KM
Time
▼
Speed
Publicidad
