Publicidad
Idiomas disponibles
Idiomas disponibles
Risk of scalding. High water temperature can cause severe burns.
Be sure to set the water temperature for your hot water heater at or below 120°F (49°C)
and use extreme caution when mixing hot and cold water during use.
Brondell is not liable for any misuse of product or failure
Warm water wash (FSA-25 dual temperature
model only)
To adjust water temperature (when both hot
and cold water are connected), slowly turn
dial clockwise towards "+" until the desired
temperature is reached.
NOTES:
There may be a delay in the warm water
reaching the bidet attachment as the cold
water in your pipes clears and is replaced
with hot water (similar to the delay when
you turn your faucet on).
If only connected to cold water, make
sure that the temperature dial on the
bidet attachment is turned as far as it
can go towards the "-" setting for best
pressure adjustability.
TIP: For a quick and easy way to get
warm water to the bidet, run the "Nozzle
Cleaning" function with the warm water
turned on for a short time until the water
heats up, then use as normal.
WARNING
to use caution when connecting to hot water.
13
Publicidad
