Mobvoi T4000 Manual De Instrucciones página 5

EN
Technical Parameters:
Working voltage
Max load
Outsize
Running area
Motor power
Speed
Control method
Weight
Function
Spare parts list:
NO. Name
ST4.2 x 22 bolts
1
M8 x 45 bolts
2
5mm internal hexagonal wrench
3
6mm internal hexagonal wrench
4
13-15 open wrench
5
15mm socket wrench
6
Power wire
7
Safety lock
8
Methyl silicone oil
9
Phone bracket
10
Left handlebar Right handlebar
11
Controller
12
Manual
13
Product Introductions 07
AC 220-240V 50Hz
120kg
Fold: 1396x688x130mm
Unfold: 1350x688x1108mm
400x1000mm
0.75 HP
1.0-12.0Km/h
Controller Touch Button
34 kg
Walking Pattern, Running Pattern
Qty. Remark
2 Fix phone bracket
Fix left and right handlebar
4
1 Others
Adjust running belt
1
1 Others
1 Folding handle force adjustment
1
1
2
1
1 for each
1
1
08 Installation Procedure
3. Installation Procedure
Put the main body on the carpet or cushion as shown in the picture after taking out from packing
carton.
As shown in the step1 of the left picture, open the folding handle in the direction shown in the
picture. Meanwhile the lower end of the riser will naturally expand to the two sides. Raise the riser
upward to the upper limit position as shown in Step 2 of the left picture. Press "Folding Handle"
and locked riser as shown in Step 3 of the left picture.
Fix "Phone Bracket" with two pieces ST4.2*22 bolts on riser beam as shown in Step 4 of the right
picture. Cut out 4 pieces of "Square Rubber Plugs" as shown in Step 5 of the right picture. Insert
left and right handlebar into the corresponding positions and lock them into the corresponding
screw holes of the handlebar through the riser with two pieces of M8*45 bolts. Put 2 pieces of
"Square Rubber Plugs" back into the previous square hole. And keep the remaining two pieces by
yourself as shown in Step 7 of the right picture. Put the "Safety Lock" into the corresponding
position under the beam of the riser as shown in Step 8 of the right picture. Insert the power cord
into the socket of the power switch and install it.
If the ground is not flat or the treadmill shakes, please
adjust the four adjustable foot pad under the treadmill
to the appropriate position. (As shown in the figure.)
Note: Please check again whether all bolts are locked after the
assembly of this machine.
EN