Periodic maintenance and adjustment
Owner's tool kit
EN
6
Image may differ from kit contents
The bike is provided with a tool bag.
The owner's tool kit is located under the
passenger seat.
The service information included in this
manual and the tools provided in the ow-
ner's tool kit are intended to assist you in
the performance of preventive mainte-
nance and minor repairs. However, addi-
tional tools such as a torque wrench may
be necessary to perform certain mainte-
nance work correctly.
NOTE
If you do not have the tools or experience
required for a particular job, have a Benelli
dealer perform it for you.
A list of workshops is available on our
website www.benelli.com.
NOTE
• The annual checks must be perfor-
med every year, except if a kilome-
ter-based maintenance is performed
instead.
• Following the frequency indicated
in the table, after the "5th" coupon,
resume operations from the "2nd"
coupon.
• Items marked with an asterisk
should be performed by a Benelli
dealer as they require special tools,
data and technical skills.
• The use of non-original replacement
parts may accelerate motorbike
wear and tear and cut shorts its life.
Failure to perform recommended
operations or the use of non-original
parts may render the legal warranty
null and void.
• The replacement and/or topping up
of lubricants and fluids, must only be
carried out with the recommended
products.
6 - 2
NOTE
AIR FILTER
The air filter needs to be replaced more
often if the vehicle is used in particularly
damp or dusty environments.
HYDRAULIC BRAKE MAINTENANCE
• Check brake luid levels on a regular
basis and top up as necessary.
• Every two years replace the internal
components of the brake master
cylinders and calipers, and change
the brake fluid.
• Replace the brake hoses every four
years and if cracked or damaged.
The following section shows all of the
maintenance operations.
KEY
Inspection and adjustment,
I
cleaning, lubrication or
replacement, as needed
Tighten to the
T
torque listed
R
Replacement
Dealer